EKM Dash

Tutorials for the setup and operation of the EKM Dash software.

How to Reset the Resettable kWh in the v.4 and v.5 Omnimeters
The OmniMeter Pulse v.4 and Omnimeter HV v.5 both have resettable kWh values, along with non-resettable kWh values. To reset the resettable kWh values usi...
Fri, 24 May, 2019 at 10:00 AM
How to Set Up Maximum Demand
For the Omnimeter Pulse v.4 and Omnimeter HV v.5: Max demand is a value that is stored in the meter itself, whether it is connected to the software or not....
Fri, 24 May, 2019 at 10:09 AM
How to Change Pulse Input Ratios In v.4 and v.5 Omnimeters
Our v.4 and v.5 Omnimeters now come with a default pulse input ratio of 1:1 but some early models came with a 1000:1 ratio. This meant that the Omnimeter wo...
Fri, 24 May, 2019 at 9:53 AM
How to Reset the Resettable Pulse Counts in the v.4 or v.5 Omnimeters
To reset the Resettable Pulse Count in the EKM Dash software: Click the Meters icon Click "Edit Meter" Click "Pulse" Click the tab ...
Fri, 24 May, 2019 at 9:57 AM
How to Adjust the Meter Date/Time
This works only if you have the meter connected to either our EKM Blink USB converter or our iSerial converter — not with the EKM Push. To set th...
Fri, 22 Jan, 2016 at 4:12 PM
How to Use the Hex Inspector
If you're interested in seeing how the Omnimeters communicate you can use the Hex Inspector in EKM Dash to see the raw RS-485 data from the meters. You...
Wed, 16 Aug, 2017 at 10:44 AM