EKM Support Desk

Adding meters to EKM Dash is pretty straight forward if you know what to do. Here are the step to take: If you're reading your meter with an EKM Pus...

Here are the steps to set up pulse counting: From the main window in EKM Dash click the meter you would like to edit in the Meters listbox in the upper le...

Setting CT Ratio Setting Meter Date and Time Setting Demand Period or Resetting Max Demand Setting Time of Use Tariffs Setting Pulse Output Ratio (v...

Here are the steps to create and schedule reports in EKM Dash: Open Dash to the main window and click the "Events" icon in the upper right corne...

To change the CT Ratio of your meter you will either need to be reading your meter with a Push3 gateway and your online account portal, or connect the meter...

You can use the EKM Dash Database Manager to access your EKM Dash database files.  You can then create new database files, or export them to be used on a di...

The EKM Dash software supports different Time Of Use periods that you can set in accordance with your electricity utility provider's ...

Trigger events are set up to perform an action when one or more data parameters are satisfied This is how to set up a triggered event: Open EKM Dash ...

To do this with the EKM Dash software you will need to connect the meter to your computer using one of our EKM Blink USB Converters or&...

Over time the amount of data stored in your local Dash database can become too great for Dash to handle effectively. Often times most of that data is no lon...